User`s guide

29
Setup|Enable Bit Timing - Enable collection of I
2
C Bus Bit Timing
information. Bit timing information is available in the "Show
Message Timing" pop-up menu described below.
Bit Timing causes the external pod to generate a 9 times increase in
data, and can result in pod data recording memory overflow on high
bandwidth or high speed bus traffic.
Setup|Select SBS Revision - Displays the Smart Battery System
(SBS) Revision dialog box.
Use this dialog box to select the SBS revision used by system
components. When displaying messages in SBS protocol, the I
2
C
Bus Monitor Plus software will detect and display the following
protocol violations using the selected specification revision.
SBS Protocol violation detection includes:
[VALUE RANGE VIOLATION]
[STRING LENGTH < MINIMUM]
[STRING LENGTH > MAXIMUM]
[BLOCK LENGTH < MINIMUM]
[BLOCK LENGTH > MAXIMUM]
[RESERVED BIT VIOLATION 0xXXXX]
[NO CHARGER ALARM VIOLATION]
[NO HOST ALARM VIOLATION]
[INVALID ERROR CODE 0xXXXX]
[RESERVED ERROR CODE 0xXXXX]
[RESERVED VALUE VIOLATION 0xXXXX]
[VALUE VIOLATION 0xXXXX]