User`s guide

Setup|Logic Level Threshold - Displays the Logic Level Threshold

dialog box. Use the Logic Level Threshold dialog box to set the

logic level threshold on the I

C Clock and Data lines. Logic levels

for TTL (5V Logic), 3.3V Logic, and Custom levels for 0.50V to

2.50V are supported.

Setup|Trace Control - Displays the Trace Control dialog box. Use

the Trace Control dialog box to set Trace start conditions.

Select "Auto Start" to start tracing messages on the first I

C Bus

Start event.

Select "Trigger In" to start tracing messages on the first I

C Bus

Start event after the Trigger In port goes low. Use this setting to

synchronize data collection with external

signals.

Setup|Trigger Out - Displays the Trigger Out dialog box. Use the

Trigger Out dialog box to set Trigger Out port low pulse conditions.