User`s guide

Installation - ISA Interface Card Version (XP x86 ONLY)

The following instructions apply to installing and configuring the

ISA version of the I

C Bus Plus interface card in most PCs. Refer to

the manual that accompanied your PC for detailed instructions on

installing cards in your PC.

The I

C Bus Monitor Plus uses a CIO-DIO24 ISA interface board

and InstaCal driver software to access the external pod.

1. Installing the ISA Card Configuration Software

Insert the InstaCal CD you received with the I

C Bus Monitor Plus

into your DVD/CD-ROM drive. If the driver installer does not start

automatically, double-click on the installer (icalsetup.exe) on the

CD to begin the installation. Install the InstaCal software by

following the instructions on screen.