User`s guide

1. Installing the PC-CARD Driver Software

Insert the InstaCal CD you received with the I

C Bus Monitor

Plus into your DVD/CD-ROM drive. If the driver installer does

not start automatically, double-click on the installer

(icalsetup.exe) on the CD to begin the installation. Install the

InstaCal software by following the instructions on screen.

NOTE: Once the InstaCal software is installed, you must restart

your computer to complete the installation.

2. Installing the PC-CARD and Driver

This board is completely plug and play capable. To install the

interface board:

1. Insert the PC-CARD-D24CTR3 board into any available

PC-CARD slot.

2. Windows will automatically detect the board as it is

inserted and will install the driver software.

3. Configuring the PC-CARD

Configure your interface board by running the InstaCal program via

the Start|Programs|Measurement Computing|InstaCal menu.

InstaCal will automatically detect the new board. Follow the

instructions on screen to complete the board configuration and

testing.