User`s guide

3. Configuring the PCI Card

Configure your interface board by running the InstaCal program

via the Start|Programs|Measurement Computing|InstaCal menu.

InstaCal will automatically detect the new board. Follow the

instructions on screen to complete the board configuration and

testing.

Installation - PC-CARD Interface Version (XP x86 ONLY)

The following instructions apply to installing and configuring

the PC-CARD version of the I

C Bus Plus interface card in most

PCs. Refer to the manual that accompanied your PC for detailed

instructions on installing PC-CARDs in your PC.

The I

C Bus Monitor Plus uses a PC-CARD-D24CTR3 interface

board and InstaCal driver software to access the external pod.