User`s guide

9
Installation - PCI Interface Card Version
The following instructions apply to installing and configuring
the PCI version of the I
2
C Bus Plus interface card in most PCs.
Refer to the manual that accompanied your PC for detailed
instructions on installing cards in your PC.
The I
2
C Bus Monitor Plus uses a PCI-DIO24 PCI interface
board and InstaCal driver software to access the external pod.
1. Installing the PCI Card Driver Software
Insert the InstaCal CD you received with the I
2
C Bus Monitor
Plus into your DVD/CD-ROM drive. If the driver installer does
not start automatically, double-click on the installer
(icalsetup.exe) on the CD to begin the installation.. Install the
InstaCal software by following the instructions on screen.
NOTE: Once the InstaCal driver software is installed, you must