User`s guide

7
C Make sure that all interconnections are made BEFORE
applying power to the host computer, I
2
C Bus Monitor, and
target system.
C If you are using a laptop computer or host computer that is
NOT connected to mains earth ground, make a hard-wired
connection from the host computer (i.e., port connector
shell) and the target system ground connector to a common
earth ground point.
C Avoid plugging and unplugging system components while
the host computer or target system is powered.
C Ensure that any devices connected to the target system are
properly grounded to the common earth ground point.
C If unsure how to properly ground system components, seek
electrical expert help.
WARNING: Any damage caused by Electrostatic Discharge
(ESD) through inadequate earth grounding is NOT covered
under the warranty of this product.
Installation - PCI Express (PCIe) Interface Card Version
The following instructions apply to installing and configuring
the PCI Express (PCIe) version of the I
2
C Bus Plus interface
card in most PCs. Refer to the manual that accompanied your
PC for detailed instructions on installing cards in your PC.
The I
2
C Bus Monitor Plus uses a PCIe-DIO24 PCI interface