Owner`s manual

Basic operation

Press POWER button to turn on the power.

Open the CD door, display shows “OPEN”, then load the Disc

with the label side up and press it onto the spindle until it

“CLICKS” on the central support of the compartment. Close the

door.

-8-

CD OPERATION

Step 1 - Push the CD door open button to open CD door.

Step 2 - Loading disc as shown.

Step 3 - Be sure that disc is located in proper position.

Step 4 - Push CD door close.

OPEN LOAD POSITION CLOSE

The disc will spin and the unit will read, display shows

“READING”, the display will show the total number of tracks and

the playing time of the disc. Press the CD-play/pause button

once. The display will show the first track number on the disc,

then indicate the elapsed time as shown, and play will start.

If there is no disc in the CD compartment and the CD button is

pressed, the LCD will show “NO DISC.”

Adjust the VOLUME control to a comfortable level.

Press and release the CD-TUNER-SKIP + or - button to skip to the

desired track.

Press and hold the CD-TUNER-SKIP + or - button to search for the

desired section within a track.

Press the button to pause temporarily. The LCD will appear

as shown below.

Press again to resume.

Press the STOP button to stop playing. The display will show the

total number of tracks and the playing time of the disc.