User manual
26
10. Operation
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identied by the controller.
This DMX starting address species the rst DMX channel to which the effect light responds. The remaining control
channels come after this rst DMX channel (DMX starting address).
The effect light requires 2 free DMX channels.
Setting the DMX starting address
• Push the button FUNC until Addr is displayed and push the button ENTER.
• Select
the desired starting address 001-512 with the arrows.
• Conrm your selection again with ENTER.
The
following tables provide information about the effects of the settings on the individual DMX channels.
DMX channel Value Function
1 000-009 Light off
010-049 Sound-to-light mode
050-255 Automatic
operation slow > fast
2 000-009 All automation effects alternatively
010-031 Automatic
effect 1
032-063 Automatic effect 2
064-095 Automatic mode 3
096-127 Automatic
effect 4
128-159 Automatic effect 5
160-191 Automatic
effect 6
192-223 Automatic effect 7
224-255 Automatic effect 8