User manual
26
10. Operation
Setting the DMX operating mode
• Set >> 6 ch in menu ChNd to operate the device in 6-channel DMX operation.
• Set >> 1 ch in menu ChNd to operate the device in 1-channel DMX operation.
Setting the DMX starting address
• Push the button FUNC until Addr is displayed and push the button ENTER.
• Select the desired starting address 001-512 with the arrows.
• Conrm your selection again with ENTER.
The following tables provide information about the effects of the settings on the individual DMX channels.
1-channel DMX operation
DMX channel Value Function
1 000-009 Lights off
010-039 Sound-to-light operation, all effects alternatingly
040-079 Sound-to-light mode, effect 1
080-119 Sound-to-light mode, effect 2
120-159 Sound-to-light mode, effect 3
160-199 Sound-to-light mode, effect 4
200-255 Sound-to-light mode, effect 5
6-channel DMX operation
DMX channel Value Function
1 000 Lights off
001-199 Brightness setting all colours dark > bright
200-247 Flash
248-255 All colours full brightness
2 000-255 Brightness setting red dark > bright
3 000-255 Brightness setting green dark > bright
4 000-255 Brightness setting blue dark > bright
5 000-255 Brightness setting white dark > bright
6 000-009 Motor off
010-255 Motor speed slow > fast