User manual

AC
Power Adaptor
1. Mount the brackets onto the chosen wall location. Use the mounting screws
included with the display to fasten the brackets onto the sign.
2. There are two wires from the power adapter. First connect the two-prong
end to any AC wall outlet. Second, connect the single prong
end to the display via the location on the end cap.
3. As soon as you connect the single prong end to the sign, the sign should
automatically light up and start displaying the "demo" message that is a
preprogrammed message showing all the features of the display.
your sign does not turn "ON", please turn to the user manual Help Section on
page .
4. Surge protectors are recommended if you are in an area where power out-
ages are frequent.
IR SENSOR
INSTALLATION AND SET UP
Note : If
26