User Manual

- 19 -
ITEM PART NO. DESCRIPTION
1.5HP
2HP
3 HP
1. 01160 KEY, 1/4” SQUARE x 2” LONG 2 2
2
2. 01283 KEY, 1/4” SQUARE x 1-1/4” LONG 1 1 1
3. 01561 SHEAVE, 2A - 4” 1 1 1
4. 19876 SHAFT, INTERMEDIATE 1 1 1
5. 05586 BEARING, PILLOW BLOCK 2 2 2
6. 16585 SPROCKET, 60 TOOTH 1 1 1
7. 06067 MOTOR, ELECTRIC 1.5 HP, 1-PHASE, 230 VOLT 1
19918 MOTOR, ELECTRIC 1.5 HP, 1-PHASE, 115 VOLT
06025 MOTOR, ELECTRIC 2 HP, 1-PHASE, 230 VOLT 1
16729 MOTOR, ELECTRIC 3 HP, 1-PHASE, 230 VOLT 1
8. 16936 STAND, PILLOW BLOCK 1 1 1
9. 16939 CHAIN, #40 ROLLER, 35” 1 1 1
10. 16940 BRACKET, MOUNTING 1
11. 16941 ANGLE 1 1 1
12. 16942 SPROCKET, 14 TOOTH 1 1 1
13. 16943 BAR 2 2 2
14. F023206PMS PAN HEAD MACHINE SCREW, #8-32 x 3/4” 2 2 2
15. F0232HN HEX NUT, #8-32 4
16. F02LW LOCK WASHER, #10 4
17. F061608FWS FLANGE LOCKING SCREW, 3/8-16 x 1” 2 2 4
18. F061608HCS HEX HEAD CAP SCREW, 3/8-16 x 1” 2 2 2
19. F061610HCS HEX HEAD CAP SCREW, 3/8-16 x 1-1/4” 1 1 1
20. F061612HCS HEX HEAD CAP SCREW, 3/8-16 x 1-1/2” 4 4 4
21. F061616HCS HEX HEAD CAP SCREW, 3/8-16 x 2” 4 4 4
22. F0616FN FLANGE LOCK NUT, 3/8-16 2 2 4
23. F0616HN HEX NUT, 3/8-16 11 11 11
24. F06LW LOCK WASHER, 3/8” 11 11 11
25. F06SW WASHER, 3/8” 16 16 16
REPLACEMENT KITS
06068 ADAPTER, 145T TO 182-184T FRAME (Included with 1.5hp motor)
19916 MOTOR CONTROLLER, 115V 20 AMP (ENCLOSURE & STARTER)
19917
MOTOR CONTROLLER, 230V 16 AMP (ENCLOSURE & STARTER)
19919 SWITCH ENCLOSURE
19920 MOTOR STARTER, 115V 20 AMP
19921 MOTOR STARTER, 230V 16 AMP