User Manual

- 15 -
ITEM PART NO. DESCRIPTION
MM60 MM80 MM90
1. 01056 HAIRPIN, 1/8” x 2-3/8” LONG 1 1 1
2. 01177 GREASE FITTING, 45 4 4 4
3. 01280 SOCKET HEAD SHOULDER SCREW, 3/8” x 3/8” 1 1 1
4. 01550 BALL BEARING (Includes seal & locking collar) 2 2 2
5. 05002 PILLOW BLOCK 2 2 2
6. 05082 BRACKET, GRID SUPPORT 2 2 2
7. 05475 RING, RETAINING 2 2 2
8. 05665 TRUNNION 2 2 2
9. 05918 SEAL KIT 2 2 2
10. 06327 WASHER 4 4 4
11. 16737 HANDLE, DUMP 1 1 1
12. 16806 GRID, MM60 1
16807 GRID, MM80 1
16781 GRID, MM90 1
13. 16832 OPENER, GRID, MM60 1
16782 OPENER, GRID 1 1
14. 17076 DRUM, MM60 1
17077 DRUM, MM80 1
17078 DRUM, MM90 1
15. 17079 LOCKING BAR 1 1 1
16. 18903 GRIP, DUMP HANDLE 1 1 1
17. F051808HCS HEX HEAD CAP SCREW, 5/16-18 x 1” 4 4 4
18. F0518ELN ELASTIC LOCKNUT, 5/16-18 5 5 5
19. F061606HCS HEX HEAD CAP SCREW, 3/8-16 x 3/4” 1 1 1
20. F061610CB CARRIAGE BOLT, 3/8-16 x 1-1/4” 8 8 8
21. F061610HCS HEX HEAD CAP SCREW, 3/8-16 x 1-1/4” 2 2 2
22. F0616ELN ELASTIC LOCKNUT, 3/8-16 2 2 2
23. F0616HN HEX NUT, 3/8-16 8 8 8
24. F06PW WASHER, 3/8” SAE 1 1 1
25. F06SW WASHER, 3/8” 1 1 1
26. F081314HCS HEX HEAD CAP SCREW, 1/2-13 x 1-3/4” 4 4 4
27. F0813ELN LOCKNUT, 1/2-13 NYLOC ZP 4 4 4
28. F08SW WASHER, 1/2” 5 5 5
REPLACEMENT KITS
01427 GREASE FITTING CAPS (Set of 12) 1 1 1
06090 TRUNNION ASSEMBLY (Includes 2,4,7-9) 2 2 2
17230* DRUM ASSEMBLY, MM60 1
17231* DRUM ASSEMBLY, MM80 1
17232* DRUM ASSEMBLY, MM90 1
* Includes trunnions, pillow blocks, shaft, paddles, & grid