Instruction Manual

51
TERMINOLOGY CURB
BACK OF CURB The distance from the grade to the top of curb on the back fill side.
TOP OF CURB The distance from the back of curb to the face of curb.
FACE OF CURB The slope on the curb face, a typical slope is 1".
TOE OF CURB The distance from the grade to the face of curb.
BATTER Batter is added to the base to insure the curb will stand. If there is no
batter, MBW Inc. cannot guarantee the curb will stand.
BASE OF CURB The distance across the bottom of the curb minus the batter.
RADII Corners of mold can not be made without a bend radii. Minimum raĆ
dius is 1/4".
.
BASE OF
CURB
BACK OF
CURB
TOP OF
CURB
FACE OF CURB
TOE OF
CURB
BATTER CURB
RAD. 1
RAD. 2
RAD. 3
BATTER CURB
TERMINOLOGY SIDEWALK
SIDE The distance from the grade to the top of the sidewalk.
TOP The distance from one side to the other side.
BATTER Batter is added to the base to insure the curb will stand. If there is no
batter, MBW Inc. cannot guarantee the curb will stand.
BASE The distance across the bottom of sidewalk minus the batter.
RADII Corners of mold can not be made without a bend radii. Minimum raĆ
dius is 1/4".
RAD. 1
RAD. 2
SIDE
BASE
BATTER
TOP
BATTER