User guide

- 7 -
3. Using a medium strength thread locker on the
threads of the bolts, fasten the pump to the engine.
4. Use a thread sealant when reinstalling any removed
fittings.
5. Fasten engine and pump subassembly into frame.
6. Reinstall hoses.
Parts Replacement Cycles and Tolerances
Pump Components Refer to your pump manufacturer’s Owner’s Manual.
Engine Components Refer to your engine manufacturer’s Owner’s Manual.
Hardware
Replace any worn or damaged hardware as needed. Replacement hardware should
be grade 5 and zinc plated unless otherwise specified.
Safety Decals Replace if they become damaged or illegible.
Seals & Gaskets Replace if a leak is detected and at every overhaul or tear down.