User Manual

3
DIPSWITCH SETTING IN AUTO MODE
1. #2: Red color
2. #3: Green color
3. #4: right rotation slow
4. #5: right rotation medinum
5. #4 and #5: right rotation Fast
6. #6: rotation back and for slow
7. #7: rotation back and for medium
8. #6 and #7: rotation back and for fast
9. #8: strobing slow
10. #9: strobing med
11. #8 and #9: strobing fast
DMX ADDRESS MATHEMATICAL RIDDLE:
ADDR ＝CH_NUM × N + 1
CH_NUM：DMX CHANNEL OF THIS PROJECTOR，CH_NUM>=1
N: PROJECTOR CHANNEL NUMBER，N=0,1,2,3……
EG：Each projector is distributed with 4 DMX channels
Loop1 ADDR＝1； Loop2 ADDR＝5；
Loop3 ADDR＝9； Loop4 ADDR＝13；
Address Setting:
In binary system, there are only two number. 0 meaning "OFF" and 1 meaning "on". The numbers
increase by multiplying the previous value by 2. Positions from dipswitch 1 to dip switch 9 signify binary
value from lower to high position.
EG： LOOP ADDR BINARY
1 1 100000000
2 5 101000000
3 9 100100000
DMX control table:
Channel
Function
DMX512 Value
Detail
CH1
Mode
0～4
Close Laser
5～33
DMX Red
34～62
DMX Green
63～91
DMX Red/Green
92～120
Automatic Red
121～149
Automatic Green
150～178
Automatic Red/Green
179～207
Sound Red
208～236
Sound Green