User Manual

2
Technical Specification:
1 AC PowerAC 110 V / 220V, 60 / 50 HZ, Fuse (2A)
2 Laser Wavelength 532nm, Green, Power 40mW ;
Wavelength 650nm, Red, Power 60mW ;
3 Control system: high capacity macro processor
4 Display ModeDMX/ Sound Active/ Auto
5 Laser Safety LevelClass IIIB
6 Connector3-pin DMX Connector / XLR
7 Net Weight 5KG
8 Size 340MM*214MM*200MM (L x W x H)
Function Settings:
3 Work Modes:
1. SOUND_ACTIVE —— triggered by sound only
2. AUTO_MODE—— default program, not subject to change with the external effect
3. DMX MODE——controlled by DMX 512 console only, receive console’s data
Set the system function with the dipswitch
See the function listed below.
1. The dipswitches 10 and 9 are for the setting of the system function.
The dipswitches 1-9 are for the setting of the DMX Channel Address in DMX mode.
2. The setting of the projector’s address is needed via DMX mode. Under control of DMX 512 console,
the projector takes up 2 channel.
0=OFF 1=ON X=0FF or ON
DIPSWITCH CHART
FUNCTION
1
2
3
6
7
10
1
X
X
X
X
0
AUTO_MODE
0
X
X
X
X
0
SOUND_ACTIVE
SET DMX ADDRESS
1
DMX MODE