LEDSMARTSCAN User Manual Please read this user manual before using this product.
Features Voltage: AC120V Set the desired Master-mode for the master device, set the respective 60Hz Slave-mode for all slave devices. High performance mobile DMX scanner with 1 x 30W LED source Please note: The function G-3- is only meant for service purposes, please 8 Colors + White do only use this function if you want to set the unit shortly into standby 8 Gobos + Spot mode.
Every DMX-controller has a different occupation with different features. Addressing DMX-Protocol The Control board allows you to assign the DMX fixture address, which is Channel 1-Horizontal movement (Pan) defined as the first channel from which the scanner will respond to the Push slider up in order to move the mirror horizontally (Pan) controller.
Channel 4- Gobos Value 0 7 8 14 15 21 22 Channel 5- Shutter/Strobe Feature Value OPEN Feature 0 7 Blackout 8 15 Shutter open Spin Gobo 2 16 131 Strobing slow-fast 28 Spin Gobo 3 132 139 Shutter open 29 35 Spin Gobo 4 140 180 Shutter slow open-fast close 36 42 Spin Gobo 5 181 189 Shutter open 43 49 Spin Gobo 6 190 231 Shutter fast open-slow close 50 56 Spin Gobo 7 232 239 57 63 Spin Gobo 8 Sutter open(235 3-5seconds) 64 70 OPEN SHAKE 71 77 GOBO 1 SHAK
Technical Specifications Channel 8- Movement speed Power supply AC120V, 60Hz Power consumption 50W DMX channel 8 Cleaning and Maintenance DMX 512 connection 3-pin XLR The operator has to make sure that safety-relating and machine technical Sound-control Via built in mic installations are inspected by an expert after every four years in the Flash rate 18Hz course of an acceptance test.
