007-2011 JEEP WRANGLER / RUBICON Removal of Stock System: 1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers and rubber insulators. Figure 1 2. Loosen the guard below the transfer case and remove. Refer to Figure 1. Figure 2 3. Start to remove the exhaust by loosening the clamp just before the muffler on the driver’s side. Refer to Figure 2. 4. The muffler can be removed by removing the hangers from the rubber isolators, one on each side. Refer to Figure 3. Figure 3 5.
