Technical information

IBM United States Hardware Announcement 112-002 IBM is a registered trademark of International Business Machines Corporation

warnings during startup. These are not required for target ports (used to connect to

host systems) as target ports are self-terminating.

FC cable, 50u, 31m, LC/LC (#1051)

This 50-micron FC cable is 31 meters long with an LC connector on each end. Its

intended use is connecting the N series machine to its host system.

FCoE SFP+ copper cable, 5m (#1055)

This feature provides a 5-meter passive, copper, SFP+ cable for connecting the

copper-cabled Fibre Channel over Ethernet (FCoE) adapters on N series controllers

to a Cisco FCoE switch.

8 Gb FC Mezzanine (#2030)

This feature provides a mezzanine card with two FC ports that will auto-negotiate

to 1, 2, 4, or 8 Gbps speeds. One of feature #2030 is required, per controller,

for installations utilizing FC connectivity. This card can be configured either as an

initiator or a target. There are no on-board FC ports on the N3240.

10 GbE Mezzanine (#2031)

This feature provides a mezzanine card with two 10 Gbps Ethernet ports that utilize

SFP+ connections to the network. One of feature #2031 is required per controller

for 10 Gbps network connections.

(#4020) 1 TB SATA Drive

This feature provides one 1 TB SATA drive. Physical storage capacity is up to 1 TB.

(#4021) 2 TB SATA Drive

This feature provides one 2 TB SATA drive. Physical storage capacity is up to 2 TB.

(#4022) 3 TB SATA Drive

This feature provides one 3 TB SATA drive. Physical storage capacity is up to 3 TB.

Note: This feature requires Data ONTAP 8.0.2, or later, be installed on the storage

controller.

HDD Blank Panel (#4099)

This feature provides one blank panel used to close the space left vacant by the

removal of a disk drive. The disk bay must not be left open; this feature covers the

opening.

Licensed Function Indicators

Data ONTAP Essentials (#A8Q0 and #A8QH)

These features enable the Data ONTAP Essentials licensed function. Data ONTAP

Essentials feature includes CFO (dual-node only), SyncMirror, Deduplication,

FlexCache, MultiStore, NearStore, HTTP, and DSM for MPIO (25 licenses per

controller).

The corequisite IBM 2870 feature must be specified to establish authorization for use

of the Data ONTAP Essentials licensed function.

FCP initial (#A8Q1 and #A8QJ)

These features enable the Fibre Channel Protocol (FCP) licensed function which is

designed to provide connectivity to clients that transfer data via the FCP, subject to