Technical information

IBM United States Hardware Announcement 112-002 IBM is a registered trademark of International Business Machines Corporation
11
Note: Use of this feature with FCP attachment requires the FCP feature.
Note: This feature requires an electronically distributed installation file available on
the N series Support website. Refer to the Software requirements section for details.
SnapDrive for Windows (#8050)
This feature provides SnapDrive for Windows function. One feature must be
ordered for each host on which it will be installed. It provides a software application
that is designed to enhance the storage management capability in a Windows
environment, including easier management of dynamic volume management, cluster
management, snapshot management, and replication management.
Note: ONTAP DSM for Windows MPIO (#8052) is highly recommended when using
feature number 8050 with FCP.
Note: This feature requires an electronically distributed installation file available on
the N series Support website. Refer to the Software requirements section for details.
ONTAP DSM for Windows MPIO (#8052)
This feature provides the multipathing MPIO driver for FC data transmission in
Windows environments connected to N series machines. It is required when FC
multipathing function is required.
Note: Feature number 8052 is highly recommended when using feature numbers
8050, 8140, or 8149 with FCP.
Note: This feature requires an electronically distributed installation file available on
the N series Support website. Refer to the Software requirements section for details.
SnapManager/Oracle - WIN (#8129)
SnapManager for Oracle is designed to integrate with an Oracle Database and
automate crucial tasks such as backup, restore, database recovery, and cloning. This
feature allows connection of one Oracle host server to a storage controller. One of
this feature is required for each Oracle host. SnapManager for Oracle for Windows is
available for Oracle databases running on Windows.
Note: When running SnapManager for Oracle for Windows, iSCSI or NFS must be
licensed on the N series storage controller. When using NFS protocol, FlexClone is a
requirement. FlexClone is optional for iSCSI environments. SnapRestore is always
required with SnapManager for Oracle. The necessary SnapDrive code and license
are included as part of the SnapManager for Oracle feature.
Note: This feature requires an electronically distributed installation file available on
the N series Support website. Refer to the Software requirements section for details.
For full details on supported OS levels and Oracle database levels, refer to the N
series interoperability matrix at
http://www.ibm.com/servers/storage/nas
SnapManager/Exchange - Host (#8131)
This feature allows connection of one exchange host server to the storage controller.
One of this feature is required for each exchange host. The FCP feature or iSCSI
must be installed on the attached storage controller.
Note: SnapManager/Exchange - Host and SnapManager/Exchange - Filer provide
identical functions but support different numbers of hosts. Only one or the other is
needed, not both. SnapManager/Exchange - Filer allows connectivity to any number
of hosts; SnapManager/Exchange - Host allows just one host connection. If the
planned number of hosts to be supported, multiplied by the feature #8131 price, is
greater than the price of SnapManager/Exchange - Filer, SnapManager/Exchange -
Filer may be a more cost-effective choice. Other factors may influence this decision.
Note: This feature requires either FCP or iSCSI Protocol, SnapRestore, and
SnapDrive for Windows to be installed on the machine. This feature also requires an