Technical information

IBM United States Hardware Announcement 112-001 IBM is a registered trademark of International Business Machines Corporation

FCoE SFP+ copper cable, 5m (#1055)

This feature provides a 5-meter passive, copper, SFP+ cable for connecting the

copper-cabled Fibre Channel over Ethernet (FCoE) adapters on N series controllers

to a Cisco FCoE switch.

8 Gb FC Mezzanine (#2030)

This feature provides a mezzanine card with two Fibre Channel ports that will

auto-negotiate to 1, 2, 4, or 8 Gbps speeds. One of feature #2030 is required, per

controller, for installations utilizing Fibre Channel connectivity. This card can be

configured either as an initiator or a target. There are no on-board Fibre Channel

ports on the N3220.

10 GbE Mezzanine (#2031)

This feature provides a mezzanine card with two 10 Gbps Ethernet ports that utilize

SFP+ connections to the network. One of feature #2031 is required per controller

for 10 Gbps network connections.

HDD Blank Panel (#4099)

This feature provides one blank panel used to close the space left vacant by the

removal of a disk drive. The disk bay must not be left open; this feature covers the

opening.

450 GB SAS Drive (#4100)

This feature provides one 450 GB SAS Small Form Factor (SFF) drive. Physical

storage capacity is up to 450 GB.

600 GB SAS Drive (#4101)

This feature provides one 600 GB SAS SFF drive. Physical storage capacity is up to

600 GB.

600 GB FDE-SAS Drive (#4201)

This feature provides one 600 GB SAS SFF disk capable of encrypting its data at the

disk level. The implementation employs a commonly used encryption technology for

use when a high level of encryption security is required. Physical storage capacity is

up to 600 GB.

Licensed Function Indicators

Data ONTAP Essentials (#A8P0 and #A8PH)

These features enable the Data ONTAP Essentials licensed function. Data ONTAP

Essentials feature includes CFO (dual-node only), SyncMirror, Deduplication,

FlexCache, MultiStore, NearStore, HTTP, and DSM for MPIO (25 licenses per

controller).

The corequisite IBM 2870 feature must be specified to establish authorization for use

of the Data ONTAP Essentials licensed function.

FCP initial (#A8P1 and #A8PJ)

These features enable the FCP licensed function which is designed to provide

connectivity to clients that transfer data via the FCP, subject to the client applying

a feature activation code made available by IBM. These features are also used for

maintenance billing purposes.