Owner's Manual

Schematic diagram of installation completion

Limit screw

Step 4 Assemble the adjustment seat core and the adjustment handle core

Step 5 Assemble the bottle holder

Accessories: Seat/Handlebar Height Adjustment Elastic Knob(2pcs), Allen wrench(4#)

Accessories: bottle holder, cross recessed pan head screws M5*16mm (2 pcs), cross screwdriver

Take the bottle holder, cross screwdriver, cross recessed pan head screws (2 pcs), and x it on the

main frame. (as the picture shows)

Finally, you must reconrm that the installation is correct according to the manual before you use it.

⑫

⑨

Take an Allen wrench to remove the limit screw, take the assembled adjustment seat core, adjustment

handle core and elastic knob, and re-fasten the limit screw on the instrument with an Allen wrench.

Tighten the adjustment knobs at last.

Attention: Choose the suitable position and make sure the adjustment knob is inserted into the

hole.(There should be “pop” sound when the knob is inserted into the hole)

⑩

④

⑧