Download

Play the record through cassette
Follow the above instruction figures
1. Plug the power cable to the AC power supply. (240V/50Hz)
2. Insert a pre recorded cassette tape into cassette slot, with the exposed side against the
control button (refer above figure 2). By pushing, the cassette will slide into the cassette
mechanism and the control knob is up. Turn on the power/volume button; the cassette is
starting to play automatically.
Please note: one end of the cassette will remain visible and it is normal.
3. To fast forward the cassette, press the control knob (refer figure 3) half way down (refer
figure 4), the cassette starts to fast forward. To exit this mode, just press down the control
knob slightly
4. To jump over the sound tracks, just slightly press down and hold the knob (refer figure 3)
and release as desired to exit this mode
5. To eject the cassette, firstly to turn off the power/volume button, then press down the knob
completely (refer figure 5)
After use care
1. Take out the cassette after use and store it properly
2. Make sure the cassette roll is not loosen to stuck the device
3. Turn off power and unplug the power cord from mains.
How to use record to digital function
Downloaded from www.Manualslib.com manuals search engine