Download

Name -
lets you change the name of the track.
Move Track Up –
exchange places with the
track above this one.
Move Track Down –
exchange places with
the track below this one.
Waveform(dB) – similar to wave forms ,but
on a logarithmic scale, measured in decibels
(dB).
Spectrum –
display the track as a
spectrogram, showing the amount of energy in
different frequency bands.
Pitch (EAC) –
highlights the contour of the
fundamental frequency (musical pitch) of the
audio, using the Enhanced Autocorrelation
(EAC) algorithm.
Mono –
makes this track a mono track,
meaning it is played out of just one speaker, or
played out of the left and right speakers
equally.
Left Channel –
makes this track come out of
only the left speaker.
Right Channel –
makes this track come out
of only the right speaker.
Make Stereo Track –
if there is another
track below this one, joins them to make a
single stereo track, with the top track
representing the left speaker, and the bottom
track representing the right speaker.
When tracks are joined into a stereo pair, all
edits automatically apply to both the left and
right channel.
Split Stereo Track –
if the selected track is a
stereo track (a pair of left and right tracks joined
together as a single track), this operation splits
them into two separate tracks that you can
modify and edit independently.
Set Sample Format –
this determines the
quality of the audio data and the amount of
space it takes up. 16-bit is the quality used by
audio CD’s and is the minimum quality that
Audacity uses internally converted when you
open them). 24-bit is used in higher-end audio
hardware. 32-bit float unless you have a slow
computer or are running out of disk space.
Set Rate –
sets the number of samples per
second of the track, 44100Hz is used by audio
CDs.
Tracks can have different sample rates in
Audacity; they are automatically re-sampled to
the project sample rate (in the lower-left corner
of the window).
[MENU]
File Menu
New –
creates a new empty window
Open …-
opens an audio file or an Audacity
project in a new window (unless the current
window is empty).
Downloaded from www.Manualslib.com manuals search engine