Quick Start Guide Caution: DAB02 is a portable DAB+/DAB/FM player, without built-in antenna, an external earphone plug or audio cable must be plugged to the device to get reception to scan radio channels. Press and hold the Power Button for more than 3 seconds to turn on the radio. DAB Radio When the DAB mode is selected for the first time, press the M Button to enter into to select a region,Australian user please select [AU&EURO] region for DAB+ radio.
User Manual 1. Introduction �������������������������������������������������������������������������4 2. Packaging and Specification �������������������������������������4 2.1 Packaging ����������������������������������������������������������������4 2.2 Specifications ����������������������������������������������������������5 2.2.1 DAB Function �������������������������������������������������5 2.2.2 FM Function ����������������������������������������������������5 2.2.
7.1.6 Recalling Preset Stations ������������������������������20 7.1.7 Display Station Information ���������������������������20 8. FM Radio Menu Introduction and Operation ��������������������20 8.1 Preset List ��������������������������������������������������������������20 8.2 Channel List �����������������������������������������������������������20 8.3 Seek Mode ������������������������������������������������������������21 8.
1. Introduction DAB02 is a digital radio with DAB, DAB+, FM and MP3 functions. DAB stands for Digital Audio Broadcasting and it is the thirdgeneration broadcasting system after AM and FM analogue broadcasting. This new transmission system has great antiinterference performance qualities and can eliminate noise and distortion during the transmission process, automatically correcting errors, can also be amended which leads it to provide near CD-quality sound.
2.2 Specifications 2.2.1 DAB Function The DAB radio can receive and play all the Band III radio stations, the frequency range of DAB band III is 174.928MHZ-239.2MHZ Supports Region setting, so the device will search the appropriate band for the radio stations when the user has set up the default Region. Supports local searching. Supports searching by preferred frequency channel. Supports DRC function. Supports recording function, and the default recording format is MP2 when it is in DAB status.
Supports Tune and Seek mode. Supports recording function. The default recording format is MP3, and the capacity is up to the capacity of TF card. Supports clearing all the pre-stored radio station list, including the preset list and the channel list. Supports RDS function. 2.2.3 MP3 The device supports playing music files from TF card. Playing mode supports , and mode. Playing range can be , and files. Supports equalizer function.
3.
1 2 3 4 5 Descriptions M Button Press it to go back to the previous menu. Short press is for DAB/FM/MP3 mode converting. Long press is for storing radio stations. Select previous or next music in MP3 mode. Searching FM or DAB radio stations in FM or DAB mode. “+” means increasing the volume, “-” means decreasing the volume. Short press is for confirm selections; long press is for power on or power off the device.
4. Display Screen 4.1 Playing Screen There are three modes: DAB, FM and MP3. Battery icon: Displays the battery charge level. VOL: Displays the current volume. 11:01: Displays the current system time. Signal icon: Displays the signal strength. In the DAB or FM mode, following a short press of the Enter Button, the radio information will be displayed on the screen, (Note: only FM stations with RDS will have information that can be displayed on the screen).
4.2 Menu Screen A menu screen displays four options, with the currently selected option shows ‘>’. If more than four options are available, use the Up/Down Button to select it.
Example: Adjust the Brightness, is for increasing the brightness, is for decreasing the brightness. 4.3 Information Screen Information screens are used to display messages to the user. Example as below: It will back to the Main interface after 10 seconds if there is no radio station found.
4.4 Query Screen A query screen is used to offer the user a choice, you can respond with Yes (Select) or No (Back).
5. Main Menu Main Menu Structure When the radio is powered on for the first time, it will show the after the start-up screen, there are 4 items: , , and . Users can select , or mode. Users can also select to set system parameters, please refer to the to study how to set the system parameters.
When the DAB mode is selected, the radio will play the station that was selected last time. When it is powered on for the first time, it will search for DAB stations automatically and when the search is finished, the radio will store the list of DAB stations and display the number of received stations. It will play the first station in the list. When the FM mode is selected, the radio will display the FM screen and will play the station that was selected last time.
Welcome to FM Access to MP3 mode: Welcome to MP3 6.DAB Menu DAB Menu Structure.
6.1 Preset List Display a list of preset stations. The preset stations are stored in the memory of the DAB radio. A maximum of 30 presets can be stored. 6.2 Station List Display a list of received stations. The preset stations are stored in the memory of the DAB radio. A maximum of 30 presets can be stored. 6.
to the region. When is selected, the radio will search for radio stations automatically and display the search progress and when the search is finished, the radio will store the list of DAB stations and display the number of radio stations found. Then it will play the first station in the list. 6.4 Manual Tune Select a frequency under , then press the Enter Button to manually search for radio stations on that frequency.
¾¾Korea Band: 7A-13C 175.280 MHZ -214.736 MHZ ¾¾AU&Europe Band: 5A-13F 174.928 MHZ -239.200 MHZ ¾¾UK Band: 11B-12D 218.640 MHZ -229.072 MHZ 6.6 DRC Dynamic Range Control: Some broadcasts contain information to allow the radio to compress the dynamic range of the audio to assist listening in noisy conditions. The DRC can be set to three states: high, low and off. The default is off. 6.7 Record In the DAB mode, you can record your favourite programs. The recordings can be stored into the TF card.
7. DAB Mode Operation 7.1 Basic Operation 7.1.1 Power on DAB for the First Time When using the DAB mode for the first time or after a Reset, the radio will display the auto-search screen and when the search is finished, it will show the screen, which will display all of the stations found. It will play the first station in the list and the radio will store all of the stations found. 7.1.
7.1.6 Recalling Preset Stations Selecting in the DAB menu will display the list of preset stations, select the desired preset station and press the Enter Button to play it. 7.1.7 Display Station Information DAB radio with lots of digital information which can be shown with a short press of the Enter Button, then you can get information such as “Ensemble Label”, ”Ensemble Num”, “Service Type”, “Channels Mode” and “Bit Rate”. 8.
. Auto program found stations will be stored in the memory of the DAB radio; UP to 30 stations can be stored. The user can select any station from the list. 8.3 Seek Mode Press the M Button to go back to main menu, select and press the Enter Button to search for stations automatically. Press the Left/Right Button to search for FM stations automatically.
The system will search the stations between 87.50MHz ~ 108.00MHz automatically and will show the frequency. At the same time, it will store the received stations in the Channel List. (30 stations at most) After the search is completed, it will automatically revert to the Channel List. The Channel List will show the stored stations, and any prestored stations will be replaced. 8.
FM main menu, press the Up/Down Button to highlight , you can select the corresponding region according to your location. The Region contains: USA, Europe, Japan; Press the Enter Button to save and go back to FM main menu. 8.8 Scan Setting In the playing screen, press the M Button and enter into the FM main menu, press the Up/Down Button to and press the Enter Button.
8.10 Record In the FM mode, you can record your favourite programs: the recordings can be stored into the TF card. Insert the TF card before powering on the device, in the playing screen, press the M Button to enter into the FM main menu, press the Up/Down Button to screen, and press the Enter Button to start to record. To pause during the recording, press the Enter Button, and to stop recording, press the M Button.
9. MP3 MP3 Menu Structure 9.1 TF Card In the MP3 main menu, press the Enter Button to TF card, press the Enter Button to view TF card display and the audio files in TF card. If there are not any audio files or directories, it will display“NO FILE”; If there is an audio file, press the Enter Button to play.
9.2 Audio Setting Menu 9.2.1 Play Mode Select and press the Enter Button, then it will set the play mode to either , or ; Select one of the three modes, then press the Enter Button to save and return to .
9.2.2 Play Range Select < play range > and press the Enter Button to set the play range as , , ; Select one of the three modes, press the Enter Button to save and return to . 9.2.3 EQ Select to set the equalizer as , , , , , ; Select any one of six types, press the Enter Button to save and return to .
9.3 System Setup Please refer to of this user manual. 9.4 Main Menu Please refer to of this user manual. 9.5 MP3 User Interface for Display 10.
10.1 Set Power Off Time You can set the automatically to either 60 minutes, 45 minutes or 30 minutes as shown below: The device will power off automatically after the selected time interval has passed. 10.2 Time Setup 10.2.1 Display Time & Date This menu can display current date, time. 10.2.
menu will automatically update the current display time. Manual Set This menu can manually adjust the current time. The method is to press the Up/Down Button to adjust the number of the currently flashing item to set the time. Press the Enter Button to skip to the next one, the next one will start flashing, adjust them in sequence. When you reach the display of “week”, press the Enter Button and the settings will be saved and change the currently displayed time.
DAB radio automatically; if choosing FM mode, the default frequency is 87.5MHz. 10.6 Info Selecting the menu, it will show the software information. Press the M Button will exit the screen. 11. Safety Warning Please read before use 1. If this DAB radio has been moved from a cold place to a warm place, do not turn on the radio for 2-3 hours. (E.g.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive).