Data Sheet

Multiplying PS outputs
Merging PS outputs
Demo programs for Arduino
Download and test sketches
Additional tips and tricks
Control the PS directly with push buttons
Use PS as Nano expansion board
General tips and warnings
Troubleshooting
Best wishes!
Contacts
Product overview
POWER SHIELD 6+6 T800 (referred to as PS) is an add-on to Arduino-type boards. PS
is designed to handle strong (up to 25A) currents. Each board has 6 channels for controlling 6
loads. Each power output can be turned on and off and its power can be adjusted with
pulse-width modulation (PWM). Loads can be of any type (inductive, resistive or capacitive).
To get more channels and more power, PS boards can be stacked.
PS also has many safeguards to save time for professionals when creating a secure
system and to prevent inexperienced users from burning the system.
In addition, this PS board still has 4 colour LED indicators and 3 backlinks. The backlinks
lead to Arduino analogue inputs. One of the backlinks is an analogue current meter.
Electrical safety
1. This device is sensitive to electrostatic discharge (ESD).
2. Always use input fuses to prevent fire in case of product failure.
3. For high loads and high frequencies, please note that the device may become hot. Do
not touch when operating and for some period thereafter.
4. Use in circuits not specified in this manual is at user’s own risk.
5. Users should be 18 years or older and have good knowledge of electronics or use this
device with professional oversight.
Main features
1. Wide operating input voltage range 6.5...32V (32V is the absolute maximum).
2