Owner's Manual

OPERATION
7
POWER AND BASIC ADJUSTMENTS
Turn the Unit ON or OFF
Press button to turn the unit ON. When the unit is switched on, press and hold
button for 2 seconds to switch the unit OFF. A “GOOD BYE” message is displayed to confirm
power down.
MUTE
To mute the unit, quickly press and release button. “MUTE” is displayed. Repeat the
process to unmute the unit.
Sound Adjustments
Press and release VOLUME/SEL knob to choose sound settings in the following order:
BASS-TRE-BAL-EQ
 Bass – Choose from -7 to +7
 Treble – Choose from -7 to +7
 Balance – Choose Left or Right (up to 7 steps in either direction)
 EQ – If “OFF” turn knob to the right and choose from pre-programmed tone settings*:
o Classical
o Rock
o Pop
o Flat
o Jazz
o EQ OFF
o *Note: If one of the EQ sound settings is chosen, manual Bass and Treble
adjustments are disabled. Only “BAL” and the name of the EQ setting will show in the
Sound Adjustment menu. To disable the EQ and allow manual Bass/Treble setting,
simply scroll through the settings until “EQ OFF” is displayed.
 LOUD – Choose from ON or OFF**.
o **Note: Loudness gives a boost of low and high frequencies at low volumes, but can
add more distortion at high volumes. We recommend leaving in the OFF position and
using an EQ setting to achieve the sound profile that achieves the best low and high
volume performance for your system.
Setting Adjustments (DVD, USB, Bluetooth or AUX Sources)
Press and hold VOLUME/SEL button for the setting menu: BEEP ON/OFF-CLOCK 12/24 -
P_VOL
 In each menu item, rotating the VOLUME/SEL knob selects them and allow you to
rotate through the sub-settings.
o BEEP – Choose ON or OFF
o CLOCK – 12 or 24 hour format
o P_VOL – Preset volume level (see next page)