Owner's Manual

OPERATION

HEADPHONES, VIDEO IN/OUT and BLUETOOTH

Headphone Jack

There is a 3.5mm headphone jack in the front panel to allow for use of wired headphones.

 When a headphone plug is inserted into the jack, the unit’s speakers are muted.

Video-OUT 1

Video-OUT 1 (V-OUT 1) is a composite video connection on the unit’s rear panel intended to

connect to a video screen with a composite video input. This can be used with or as an

alternative to the HDMI video output.

Video-IN / Video-OUT 2 Function

Video-IN and Video-OUT 2 is a pass-through video connection in the event you have

existing video wiring separate of what will display the unit’s DVD and USB Media. There is

no switching or control of this video connection within the unit. It’s simply a pass through.

Bluetooth Pairing

You must first pair a Bluetooth-enabled device to stream music to your unit.

 Select “search” or “discover” on the Bluetooth device while the unit is in the BT MUSIC

mode. “RVDVD2.0” should appear in the list of available devices. Select “RVDVD2.0.”

 If a password is required, input “0000.”

 When successfully paired, BT MUSIC is displayed on LCD.

 If no Bluetooth device is paired, “UNPAIRED” will show in the LCD display.

Stream Bluetooth Audio

This unit supports Bluetooth music streaming using the Headset Profile (HSP). It also supports

text readout from compatible BT streams.

 Using a Bluetooth-enabled device, press MODE button to switch to BT MUSIC source.

It will play a song from the BT device automatically as long as it’s been selected in the

music player on the device.

 Press the 1/ button to play/pause the song. Rotate the BAND ( knob to

select next/previous song.

Disconnect Bluetooth Device

This is useful for mobile phones where the user wishes to place or receive a call.

 When the Bluetooth device is paired with the unit. Press and hold MODE button (or BT

button on the remote) to disconnect the Bluetooth. “BT OFF” is displayed.

Reconnect Bluetooth Device

This is useful if a Bluetooth-enabled mobile phone user has completed a call and wishes to

continue playing music via Bluetooth.

 Press and hold MODE button (or BT button on the remote) again to connect the

previously paired Bluetooth device. “LINKED” is displayed.