User manual

INSTALLATION
• The installation surface for the loudspeaker must be level.
• For a correct installation opening, use the provided installation template.
• The installation of the loudspeakers must be leakproof. Avoid moisture or damp onto the back of the loudspeakers.
• Fix the self-adhesive template in the selected suitable position.
NOTE: Oberserve the installation depth and the drilling depth, that no important components will be damaged.
• Insert the loudspeaker into the opening and fix it in place using the stainless steel screws supplied after the interconnection (see below).
• Tighten the screws carefully and evenly. Do not overtighten.
ENG
ASC116/ASC120
INTERCONNECTION
• Ensure always correct polarity for all connections during the installation of the loudspeakers.
• Please use only appropriate speaker cables for the connection of the loudspeakers.
• Never connect the minus-pole of the speaker terminal with the negative ground of the power supply.
• Attend by any means the correct total speaker load impedance, which will be connected to the amplifier.
• Attend also the informations of your amplifier’s manual while installing the loudspeakers.
4 OHMS
60-90 WATTS RMS
ASC120
ASC116
+ – + –
L R
LOUDSPEAKER TERMINALS
OF THE AMPLIFIER
+
–
+
–
4 OHMS
60-90 WATTS RMS
4 OHMS
100-140 WATTS RMS
+ – + –
L R
LOUDSPEAKER TERMINALS
OF THE AMPLIFIER
+
–
+
–
4 OHMS
100-140 WATTS RMS