User manual

MB Series Powered Loudspeaker
Important Safety Instructions and Precautions
MB Series Loudspeakers Description
Important Warnings
- Packing list
]
]
01- MB Series Powered Loudspeaker. The specific model is written on Connectors Panel
MB Series include Full Range Loudspeakers (MB 8.1, MB 12.1, MB 15.2), Stage Monitors (MB
12.2W, MB MAV-2W) and SubWoofers (MB 12.0, MB 18.0). All systems
Acoustic and electronic structure of MB Loudspeakers is designed
in order to optimize c
the widest MB Series Loudspeakers are particularly suitable
for high demanding applications in terms of details definition and sonic quality, arrayability and wide
dynamics program material.
be operated by personnel with
technical knowledge or sufficient experience to enable them to wo
and suspended loads.
01- Warranty statement (included in the User Manual)
After unpacking MB Series Loudspeaker, please inspect for any physical damage and retain all packing
materials for use, should ever the unit need returning. In the event that damage has occurred, please
notify your dealer immediately, so that a claim to cover the damages can be initiated.
]
]
01- Neutrik PowerCon mains connector and wiring guide (at the end of the User Manual)
01- User Manual (in the same box or in an attached envelope)
combine advanced-
technology amplifiers, close coupled signal processing, and state-of-the-art drivers housed in rugged,
roadworthy loudspeaker enclosures.
overage pattern control vs. frequency and to perform smooth frequency and phase
response over possible range. As a result
This device is studied for professional usage. All its functions need to
rk properly. Particularly it is
necessary to evaluate and avoid risks due to electricity, mechanical stability
Only use proper mains power cord and connectors (Neutrik PowerCon). The
receptacle must be connected to a fuse or circuit breaker.
Do not remove covers, do not disassemble electronic modules. No user serviceable parts inside, refer
servicing to qualified service personnel.
The unit must not be operated and service by qualified personnel should be provided when:
-Mains power cord is frayed or broken.
>
>
>
>
>
>
>
>
>
Before you use MB Series products, read User Manual carefully and observe all the safety
precautions. It is important for your protection and helps to avoid equipment failures. Keep User
Manual in a safe place so that it is available for future reference. Please give the Manual to the new
owner in case you sell this unit. Copies are available at your dealer.
This unit needs to be installed, connected and used only according to the instructions described in this
Manual. The manufacturer declines all responsibilities in case of wrong or unforseen installation as
well as for wrong usage.
Disconnect MB Loudspeaker from mains supply before making or changing connections, when left
unused for a long period of time and during lightning storms.
Lay all cables to and from the unit so that they cannot be crushed by vehicles or other equipment and
that no one can step on them.
Mains voltage and frequency must be the same as printed in this manual (on page 11) and on the rear
panel of the unit.
MB Series Loudspeakers must be grounded. The unit must not be operated unless the power cord
“Ground” wire is properly terminated. It is important as well to make sure that all of equipments in the
reinforcement system are properly grounded. Removing any protective ground connection or cable
shield connection is strongly not recommended. This is important for personal safety, as well as for
proper control over the system grounding.
Page 2