Operator`s manual

1
Brightness bar
X
To set the brightness: Rotate ymz or
slide qmr.
The brightness bar moves up or down.
X
To confirm selection: Press n or slide
om.
or
X
Press the k button.
Setting the Display Design
X
Select System£Settings£Display.
X
Select Day mode, Night mode or
Automatic.
The R dot indicates the current setting.
i
In the Automatic setting, COMAND
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
Read-Out
Setting Reading Speed
X
Select System£Settings£Text
Reader Speed.
The list of possible settings appears. The
R dot indicates the current setting.
X
To select the setting: Rotate ymz or slide
qmr.
X
To confirm your selection: Press n.
Voice Control
Switching the Help Screen On or Off
X
Select System£Settings£Voice
Control.
X
Select Help Window.
You have switched the help window on
Ç or off c.
i
In addition to the audible instructions, the
help screen displays other information
during the individualization process and the
later voice control mode.
Individualization
You can use the individualization function
option to adapt the Voice control system to
your own voice and therefore improve voice
recognition. This will affect the ability of the
system to recognize the voices of other users,
and for this reason it can be switched off
(Y page 43).
The individualization function comprises two
parts and lasts around five minutes. During
the process you will practice a few number
sequences and voice commands.
Starting New Individualization
i
It is only possible to start individualization
when the vehicle is stationary. Before
starting, switch off all devices or functions
which could interfere, such as the radio or
the navigation system. After starting the
42
Voice Control
System Settings