Operator`s manual

Dolby Digital
DTS
MLP
Setting Surround Sound
You can select LOGIC7
®
on or LOGIC7
®
off
in surround sound mode.
X
Select Sound£Surround.
Surround sound setting (display image may differ
depending on model)
X
To select the setting: Rotate ymz or slide
qmr.
X
To save the setting: Press n.
The setting is stored and you exit the menu.
X
To exit the menu without changes: Press
the k button or slide omp.
i
Please note the following:
R
For the optimum audio experience for all
passengers when LOGIC7
®
is switched
on, the balance and fade should be set to
the center of the passenger
compartment.
R
You will achieve the best sound results
by playing high-quality audio and DVD
Video.
R
MP3 tracks should have a bit rate of at
least 128 kbit/s.
R
Surround-sound playback does not work
for mono signal sources, such as the AM
waveband in radio mode.
R
If the radio reception is poor, e.g. in a
tunnel, you should switch off LOGIC7
®
because it may otherwise switch
automatically between stereo and mono
and therefore distort the sound
temporarily.
R
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
Basic Functions of COMAND
37
At a Glance
Z