Operator`s manual

X
To select FM/AM Radio: Rotate ymz or
slide qm.
X
To confirm selection: Press n.
The radio main display appears.
Tuning to a Station Manually
X
Slide mr to highlight the lower menu bar.
X
Rotate ymz or slide omp to select FM, AM
or WB.
X
Tune to a station by rotating ymz or sliding
omp.
The red line (tuning indicator) moves right
or left and stops when a receivable station
is found.
Basic Functions of COMAND
i
The COMAND components can be found
on (Y page 18). Operating examples can be
found on (Y page 30).
Switching COMAND On/Off
X
Press the q button.
A warning message is displayed. COMAND
calls up the previously selected menu.
i
If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
Sound
X
To switch on/off: Press the 8 button.
The sound from the active audio or video
source is switched on or muted.
i
When the sound is muted, you will see the
X icon in the status bar.
If you change the audio or video source or
change the volume, the sound is
automatically switched on again.
i
Announcements from the navigation
system can still be heard with the sound
switched off.
Switching Navigation Announcements
On/Off
X
Press 8 during the announcement.
i
The navigation announcements are
switched on again if you start a new route
guidance or if COMAND is switched off and
on with the q button.
Setting the Volume
X
To set: Turn the q rotary/push button.
or
X
Press the W or X button on the multi-
function steering wheel.
The volume of the selected audio or video
source changes.
34
Basic Functions of COMAND
At a Glance