Operator`s manual

The road you are currently driving on only
appears if it is in the map software.
Route Guidance Active
No Maneuver Announced
1
Distance to destination
2
Distance to next maneuver
3
Current road
4
Symbol for “follow the road's course”
Maneuver Announced Without Change of
Lane
1
Road into which the maneuver leads
2
Distance to maneuver and graphic
distance display
3
Symbol for maneuver
When a maneuver is announced, you will see
the symbol for the maneuver and beside it a
graphic distance display 2. This decreases
as you approach the announced maneuver.
Maneuver Announced With Change of
Lane
Lane recommendations are only displayed if
the relevant data is available on the digital
map.
1
Road into which the maneuver leads
2
Distance to maneuver and graphic
distance display
3
Lane recommendation
4
Symbol for maneuver
On multiple-lane roads, a lane
recommendation 3 may be shown for the
next maneuver. There may be additional lanes
during a maneuver.
Lane
Recommendation
Display
Meaning
Lane without lower
limit
Uninterrupted lane
Lane with lower limit New lane during a
maneuver
Lane with arrow Lane recommended
for the maneuver
Navigation Status Indicators in the
Multifunction Display
When route guidance is activated, the
following messages may appear:
R
<: you have reached the destination.
R
Within Destination Area: you are
approaching the destination. This message
appears, for example, with relatively large
special destinations.
R
New Route...: the system is calculating a
new route, for example because you have
deviated from the previous route. Route
guidance is subsequently resumed.
R
Calculating Route: a route is being
calculated, after which route guidance will
start.
Multifunction Steering Wheel
27
At a Glance
Z