Operator`s manual

Information Calls
The Information button ï is located in the
overhead control panel.
X
Press and hold Information button ï
(for longer than 2 seconds).
A call to the Customer Assistance Center
will be initiated. The button will flash while
the call is in progress. The operator in the
Customer Assistance Center can download
a destination (e.g service center) to your
COMAND system, which you can use for
navigation as described in the section
“Search & Send” (Y page 217).
For a complete description and additional
information on Information calls please refer
to the vehicle Operator's Manual.
Search & Send
i
In order to utilize Search & Send your
vehicle must be equipped with Tele Aid,
Navigation, and an active Tele Aid
subscription.
“Search & Send” is a navigation destination
address entry service. A destination address
located using Google Maps
®
or Yahoo Local
Maps
®
websites can be delivered via Tele Aid
directly to the Navigation system in your
vehicle.
Specify and Send a Destination
Address
i
Please refer to any specific instructions
provided by either website regarding
entering or sending an address. Each
website functions differently and is subject
to change.
X
Go to maps.google.com or
maps.yahoo.com and enter a destination
address in the address entry field.
X
Depending on which website you are using,
click on the appropriate button to send the
destination address to your Tele Aid
account email address.
X
Enter the email address you specified when
you activated your Tele Aid account in the
appropriate field when the “Send” dialog
box appears.
X
Click “Send”.
Retrieve Destination Address
X
Press the Tele Aid Information button
ï to begin the download of the
destination address to your vehicle's
navigation system.
i
If you have sent more than one
destination address to your vehicle you
must make one Information Call for each
destination address download.
X
Select Yes when the message appears
asking if you would like to start navigation.
Search & Send
217
Tele Aid
Z