Operator`s manual

Problem Possible Cause/
Consequence
Suggested Solutions
A station list entry
is not recognized.
The voice names
for the stations in
the address book
do not sound
sufficiently
different.
X
Save a speaker-dependent voice name for the
station (Y page 198)
or
X
Give the “Read out station list” command.
The system reads out the station list.
X
Press the ? button when the station you
want is read out.
The station is selected.
If you are making
speaker-
dependent voice
names, the system
prompts you to
enter them several
times.
The two voice
names differ from
each other.
X
Say the voice name with the same intonation
both times.
Help Function
Voice control has a comprehensive help
function to assist the user.
The voice control help function provides:
R
general information about how best to
operate voice control
R
a list of the possible commands
“Help Voice Control”
You can use the “Help Voice Control”
command to obtain information about how
best to operate voice control.
“Help”
If you press the ? button and say the
command “Help”, you will receive help for the
application currently selected.
If you select the “Help” command during a
voice dialog, for example after the “Dial
number” command, you will receive help
explaining how the dialog continues.
You can also request the help function for a
specific system, for example with the “Help
phone” command.
If you have activated the help window, you will
see a selection of the possible commands on
the display (Y page 42).
Troubleshooting
213
Voice Control
Z