Operator`s manual

Example: Audio main function display
1
Status line
2
Main function line
3
Main area
4
Submenu line
Status line 1 displays the time and the
current telephone status.
With the main function line 2 you can select
the main function.
Select the function with the COMAND
controller (Y page 23).
In the example, the audio main function is set
to radio mode and the main area 3 is active.
i
The arrangement of the menus can vary,
depending on the equipment. Normally, the
menus for the full equipment version are
shown in this manual.
Menu Overview
Having selected a main function, you will find
the submenu line at the bottom edge of the
COMAND display.
If one of the main functions such as
Navigation, Audio, Video or Phone is currently
selected, additional menus are available from
the main function line (Y page 19).
This is indicated by a small triangle behind the
main function label.
1
Triangle indicating an additional menu
Navi Audio Phone Video
Mode FM/AM Radio Phone DVD Video
Map Orientation SatRadio Address book Video Aux
POI Symbols On
Map
Disc (CD audio,
DVD audio, MP3
mode)
Traffic Information
On Map
Memory card (MP3
mode)
Text Information
On Map
Music Register
Ç Topographic
Map
Media Interface
COMAND Control System
19
At a Glance
Z