Operator`s manual

For further information on external video
sources please refer to the operating guide
of the device.
Connecting an Aux Source
Drive Aux
The Aux connectors of the drive are beside
the Eject button on the front panel of the DVD
drive (Y page 168).
Display Aux
The display Aux jacks are located on the side
of the screen (Y page 167).
Connecting an Audio or Video Source
X
Insert the audio jacks for the left and the
right signal into the respective connectors
labeled L and R.
X
Insert the video jack (yellow) into the
connector with the V label.
Switching to AUX Mode
Disc Drive Aux
X
Select Aux.
The Aux menu appears.
Aux menu
X
Select Source £ Drive Aux.
The video source is played if it is connected
to the drive and in playback mode. If there
is no video picture available, an Audio menu
appears.
i
For operating the external video source
please refer to the operator’s guide of the
device.
Display Aux
X
Select the display screen to which the
external source is connected.
X
Select Aux.
X
Select Source £ Display Aux.
The video source is played if it is connected
to the screen and in playback mode. If there
is no video picture available, an Audio menu
appears.
Selecting an Active COMAND Source
X
Select Aux.
X
Select Source £ COMAND.
The Audio or Video mode to which
COMAND is set is played by the RSE
system.
Operation with Active Source from
COMAND
Audio or Video that is active in COMAND can
also be played back via the RSE system.
X
Switch to the desired Audio mode or
display the menu system in Video mode on
COMAND.
X
Select the menu item on the left below, e.g.
CD if COMAND is in CD mode.
X
Select Active Aud./Vid. Source for
the Rear.
182
Aux Operation
Rear Seat Entertainment