Operator`s manual

X
To store a station to a selected preset:
Press and hold n until a signal tone
sounds.
or
X
Press and hold a number key, e.g. 4, until
a signal tone sounds.
The station is stored.
Storing via Autostore
i
The function automatically assigns
receivable stations to the presets, sorted
according to reception quality. The stations
which were stored in the station memory
manually are overwritten.
X
Press n when the main area is active.
X
Select Autostore.
or
X
Select Presets£Autostore in the radio
display.
COMAND searches for receivable stations.
A corresponding message is displayed. The
available stations are automatically stored
under the presets.
Canceling Autostore Procedure
X
Select Cancel.
Switching to Weather Band
X
Press the $ function button on the
control unit repeatedly until the weather
band is selected.
or
X
Slide mr to highlight the submenu.
X
To select the weather band: Rotate
ymz or slide o until the currently set
waveband is highlighted (FM or AM).
X
Press 9.
Waveband submeu is opened.
X
Select WB.
Searching a Channel
X
Rotate ymz or slide omp when the main
area is highlighted.
or
X
Press E or F on the control unit.
The search proceeds upwards or
downwards and stops at the next
receivable channel.
Selecting a Channel from Channel list
X
Slide mr to highlight the submenu.
X
To call up the channel list: Rotate ymz
or slide omp until Channel is highlighted.
X
Press n.
The channel list appears.
X
To select a channel: Rotate ymz or slide
qmr.
X
To tune to the selected channel:
Press n.
or
X
Press a number key, e.g. 4, on the control
unit at any time.
Station Information
i
This feature is only available for analog
FM and digital AM/FM (HD Radio)
programs.
Information on the current station is
displayed beneath the main function line.
126
Radio
Audio