User manual
User Manual of MAZi INVR-16A/32A
35
3.2.2 Using the Mouse in Live View
Table 3. 4 Mouse Operation in Live View
Name Description
Enter the menu of the system by clicking the icon.
Switch to the single full screen.
Adjust the screen layout by clicking the specific icon.
Switch to the previous/next screen.
/
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of all channels.
Add IP camera manually.
Enter the playback interface and start playing back the video of the selected
channel immediately.
Four modes of output supported, including Standard, Bright, Gentle and
Vivid.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
The dwell time of the live view configuration must be set before using Start Auto-switch.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled; you
need to switch back to the Main output with the MAIN/AUX button on the front panel or remote.
If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.
Figure 3. 1 Right-click Menu Bar
Two ways are provided to show the Right-click Menu Bar: right-clicking or moving the mouse to the bottom of the
screen.
You can click on the right side of the menu bar to fix the menu.