User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
42
4.2.2 Calling Presets
Purpose:
This feature enables the camera to point to a specified position such as a window when an event
takes place.
Call preset in the PTZ setting interface:
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Check the round icon of Call Preset.
Figure 4. 4 PTZ- Call Preset
3. Click to choose the preset number. If the number of the presets you want to save is more than 17, you can
click […] and choose the available numbers.
Call preset in live view mode:
Steps:
1. Press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar to enter
the PTZ setting menu in live view mode.
Figure 4. 5 PTZ Toolbar
2. Choose Camera in the list on the menu.
3. Double click the preset in the Preset list to call it.