User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
40
4.1 Configuring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
Figure 4. 1 PTZ- General
2. Choose the camera for PTZ setting in the Camera dropdown list.
3. Enter the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera parameters.
Example: If the PTZ camera uses the protocol of DRAGON, you should select DRAGON in the PTZ
Protocol field.
4. Click Apply button to save the settings.