User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
28
3. Click Apply to save the settings and click OK to exit the interface.
Configuring the customized protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can configure the
customized protocols for them.
Steps:
1. Click the Protocol button in the Add IP Camera (Custom) interface to enter the protocol management
interface.
Figure 2. 21 Protocol Management Interface
There are 16 customized protocols provided in the system, you can edit the protocol name; and choose whether to
enable the sub-stream.
2. Choose the protocol type of transmission and choose the transfer protocols.
The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to
Figure 2. 22.
Figure 2. 22 Protocol Setting
3. Choose the protocols you just added to validate the connection of the network camera.