User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
26
1. Enter the Camera Management interface.
Menu> Camera> Camera
Figure 2. 16 Menu
2. Repeat the step 1 and 2 of adding IP cameras manually to add the camera.
Figure 2. 17 IP Camera Management Interface
2.3.2 Editing the Connected IP cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the
icon to edit the parameters; you can edit the IP address, protocol and other parameters.