User manual
User Manual of INVR-0xA / INVR-0xPOE series NVR
24
2.3 Adding and Connecting the IP Cameras
2.3.1 Adding the Online IP Cameras
Purpose:
The main function of the NVR is to connect the network cameras and record the video got from it. So before you
can get a live view or record of the video, you should add the network cameras to the connection list of the device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please
see Chapter Checking Network Traffic and Chapter Configuring Network Detection.
• OPTION 1:
Steps:
1. Right-click the mouse when you in the live view mode to show the right-click menu bar.
Figure 2. 12 Right-click Menu Bar
2. Select (Auto) or (Manual) on your demand.
Auto
The device will add the detected IP cameras or encoders automatically by the default user name and password
of administrator.
Figure 2. 13 Auto Adding IP Camera Interface
If the user name and password is changed, the auto adding of IP camera will be failed, you may add it
manually.
Manual
Steps:
1. To add the online cameras with same network segment:
1) The detected online camera will be listed in the camera list, as shown in the figure below.