User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
17
1.6 Rear Panel
Figure 1. 5 INVR-0xA
Table 1. 6 Description of Rear Panel Interfaces
No. Item Description
1 LAN Interfaces Connector for LAN (Local Area Network).
2 RS-485 Interface Connector for RS-485 devices.
3 Power Supply 12VDC power supply.
4 Power Switch Switch for turning on/off the device.
5 USB Connects USB disks and devices.
6 Ground Ground (needs to be connected when NVR starts up).
7 HDMI HDMI video output connector.
8 VGA
D-SUB connector for VGA output. Display local video output and
menu.
9 AUDIO IN BNC connector for audio input. (Also for two-way audio)
10 AUDIO OUT BNC connector for audio output.
Figure 1. 6 INVR-0xPOE
No. Item Description
1 LAN Network Interface
Connector for LAN (Local Area Network).
2 RS-485 Interface
Connects to RS-485 devices.
3 Power Supply
100~240VAC power supply
4 Power Switch
Switch for turning on/off the device.
5 USB Interface
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
6 GND
Ground (needs to be connected when NVR starts up).
7 HDMI Interface
HDMI video output connector.
8 VGA Output
D-SUB connector for VGA output. Display local video output and
menu.
9 Audio In RCA connector for voice talk input
10 Audio Out RCA connector for audio output