User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
133
10.7 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type to HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10. 22.
The alarm type can be selected to: Audio Warning, Notify Surveillance Center and Send Email. Please
refer to Chapter Hiba! A hivatkozási forrás nem található..
Figure 10. 22 Configure HDD Error Alarm
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the list
below.
5. Click the Apply button to save the settings