User manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
107
with the lower-case English letter and cannot end with ‘-’.
Access the Device via Web Browser or Client Software
After having successfully registered the device on the HiDDNS server, you can access your device via
web browser or Client Software with the Device Domain Name (Device Name).
Task 1: Access the Device via Web Browser
Open a web browser, and enter http://www.hiddns.com/alias in the address bar. Alias refers to the Device
Domain Name on the device or the Device Name on the HiDDNS server.
Example: http://www.hiddns.com/nvr
If you mapped the HTTP port on your router and changed it to port No. except 80, you have to
enter http://www.hiddns.com/alias:HTTP port in the address bar to access the device. You can
refer to Chapter 9.2.10 for the mapped HTTP port No.
Task 2: Access the devices via VMS-A1
For VMS-A1, in the Add Device window, select and then edit the device information.
Nickname: Edit a name for the device as you want.
Server Address: www.hiddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name on the
HiDDNS server you created.
User Name: Enter the user name of the device. By default it is admin.
Password: Enter the password of the device. By default it is 12345.
Figure 9. 10 Access Device via VMS-A1
5. Click Apply button to save and exit the interface.
9.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date/time.