Instructions / Assembly

A
A (1 : 1)
GB x 2
GAF x 3
GAG x 3
LAY OUT TWO PANELS WITH THE SCREW SIDE
ON THE LEFT.
OVERLAY ONE SCREW SIDE ONTO THE OTHER
TAB SIDE, WHILE LINING UP THE HOLES.
PLACE SCREWS THROUGH HOLES
FROM THE OUTSIDE AND TIGHTEN
NUTS ON THE INSIDE.
(USE SCREW DRIVER TOOL AND
SPANNER IF REQUIRED)
THESE INSTRUCTIONS SUGGEST THE BEST WAY TO POSITION THE PARTS AND BARREL.
PLEASE FOLLOW AS PER THE DIAGRAMS
TAB SIDE
SCREW SIDE
TAB SIDE
SCREW SIDE
STEP 1
STEP 2